Tablo Connect with Dlink DIR-632 router

Support & Troubleshooting
4
  1. Update your router to the latest firmware v1.03, see link below.
  2. Have you set up DHCP Reservation for your Tablo? See Page 29 of the PDF manual, link is below. If not, please do so.
  3. You only need to configure the 2 ports on the Virtual Server page. Do NOT enter anything in the Port Forwarding page. You only want to use the Virtual Server page to forward the External port to a different Internal port.
  4. Please ensure you are using the correct internal IP of the Tablo as this can change when you reboot your router, specifically if you have not set up DHCP Reservation in Step 3.
  5. Can you please post a screenshot of the Status page of the router showing the WAN connection? See page 68 of the PDF manual. You can blank out the last 2 sets of numbers if you’re worried about security. I just want to make sure your TP-Link modem is not assigning an internal IP to your router. I looked up the modem manual too and it does in fact have a built-in DHCP server too.

http://support.dlink.com/ProductInfo.aspx?m=DIR-632

ftp://ftp2.dlink.com/PRODUCTS/DIR-632/REVA/DIR-632_MANUAL_1.00_EN.PDF

Let us know how it goes.